Video Adjustment - Video Adjustment Page - AMX Modero NXT-1200V Operation/Reference Manual

Firmware Pages and Descriptions
FIG. 89 Video Adjustment Slide-Out Options Bar

Video Adjustment - Video Adjustment Page

The Video Adjustment page (FIG. 90) (accessed by pressing the Video Adjustment button on the Setup page
and then selecting the appropriate button from the option bar) sets the Video properties of the incoming video
signal from an NXA-AVB/RGB Breakout Box.
FIG. 90
Video Adjustment page (showing default values)
The elements of the Video Adjustment page are described in the table below:
Video Adjustment Page Elements
Back:
Connection Status icon:
Settings:
Video Settings:
Status:
Format:
92
Slot 1 Slot 2
Saves the changes and returns you to the previously active touch panel page.
This visual display of the connection status allows the user to have a current
visual update of the panel's connection status regardless of what page is
currently active.
• A Lock only appears on the icon if the panel has established a connection
with a currently secured target Master (requiring a username and password).
• The Default Settings button sets the video settings to their default values
(indicated in this table).
• The Undo Changes button disregards any changes made on the page since
the last settings were saved.
• The Save Settings button saves any changes made to this page.
• The Black & White button toggles the Black & White display mode.
Default = Off.
• The Sharpness button toggles the Interpolate (Sharpness) feature.
Default = On.
• The Interlace button toggles the Interlacing feature.
Default = On.
Displays whether or not a video-sync signal is detected.
Allows you to press this blue field and cycle through a choice of available video
formats (NTSC, PAL, SECAM, or Auto detect).
• Default = Auto.
NXD/T-1200V 12" Modero® Video Wall/Flush Mount Touch Panel
Slot 3
Incoming Video signal
Once done making your screen
adjustments, SAVE SETTINGS.