Cisco SPA50X User Manual page 47

Using the Cisco SPA500S Attendant Console
Connecting the Cisco SPA500S Attendant Console to the IP Phone
STEP 3
STEP 4
STEP 5
STEP 6
!
CAUTION
STEP 7
STEP 8
STEP 9
Cisco Small Business IP Phone SPA 50X User Guide (SPCP)
Insert the pegs on the attachment arm into the peg holes on the Cisco SPA500S.
Using the attachment arm screw, secure the attachment arm to the first Cisco
SPA500S.
Insert the pegs on the attachment arm into the peg holes on the Cisco SPA500S.
Using the attachment arm screw, secure the attachment arm to the second Cisco
SPA500S.
Do not plug a telephone line cord into the AUX port. Use only the auxiliary cable
provided with the Cisco SPA500S.
Locate the AUX OUT port on the back of the first Cisco SPA500S. Connect one
end of the auxiliary cable to this port.
Locate the AUX IN port on the back of the second Cisco SPA500S. Connect the
other end of the auxiliary cable to this port.
Route the auxiliary cable inside the cable slot. The Cisco SPA500S is powered by
the auxiliary cable with the IP phone; no additional power source is required.
5
47