G4 Web Control Page - AMX NXD-CV7 Instruction Manual

Firmware Pages and Descriptions

G4 Web Control Page

The G4 Web Control page (FIG. 88) centers around enabling and disabling both the display and
control of your panel (via the web). An external PC running a VNC client (installed during the
initial communication to the G4 panel) makes this possible.
FIG. 88 G4 Web Control page
Each panel supports the open standard Virtual Network Computing (VNC) interface. These panels
contain a VNC server that allows them to accept a connection from any other device running a
VNC client. Once a connection is established to that target device, the client can control the touch
panel remotely. The elements of the G4 Web Control page are described in the table below:
G4 Web Control Page Elements
Back:
Connection Status icon:
G4 Web Control Settings:
Enable/Enabled
Network Interface Select
Web Control Name
Web Control Password
100
Saves the changes and returns you to the previously active touch panel page.
This visual display of the connection status allows the user to have a current
visual update of the panel's connection status regardless of what page is
currently active.
• A Lock only appears on the icon if the panel has established a connection
with a currently secured target Master (requiring a username and password).
Sets the IP communication values for the touch panel and contains:
• The Enable/Enabled button allows you to toggle between the two G4
activation settings:
- Enable - deactivates the G4 Web Control feature on the panel.
- Enabled - activates the G4 Web Control feature on the panel and allows
an external PC running a VNC client to access the panel (after the
remaining fields are configured).
Displays the detected method of communication to the web:
• Wired is used when a direct Ethernet connection is being used for
communication to the web. This is a default setting if no wireless interface
card is detected by the panel.
• Wireless is used when a wireless card is detected within the internal card
slot. This method provides an indirect communication to the web via a
pre-configured Wireless Access Point.
Allows you to enter a unique alpha-numeric string that is used as the display
name of the panel within the Manage WebControls window of the new NetLinx
Security browser window.
• This Web Control tab displays a G4 icon alongside the link to the Web Control
Name given to this panel (FIG. 89).
Allows you to enter the G4 Authentication session password associated for
VNC web access of this panel.
7" Modero Widescreen Touch Panels