Time & Date Setup Page - AMX NXD-CV7 Instruction Manual

Firmware Pages and Descriptions
Panel Information Page Elements (Cont.)
Setup Port:
High Port:
High Address:
High Channel:
High Level:
Serial Number:
Setup Pages Version:
Screen Width:
Screen Height:
Screen Refresh Rate:
Screen Rotation:
Power Up Pages:
Start Up String:
Wake Up String:
Sleep String:
File System:
RAM:
Time & Date Setup Page
The Time & Date Setup page (FIG. 80) allows you to alter/set the time and date information on
the NetLinx Master. If either the Time/Date is modified on this page (then updated to the Master by
pressing the Set Time button), all devices communicating to that target Master will then be updated
to reflect the new information.
Time Display
fields
Currently
selected
FIG. 80 Time and Date Setup page
90
Displays the setup port information/value being used by the panel.
Displays the high port (port count) value for the panel.
Displays the high address (address count) value for the panel.
Displays the high channel (channel count) value for the panel.
Displays the high level (level count) value being used by the panel.
Displays the specific serial number value assigned to the panel.
Displays the type and version of the Setup pages being used by the panel.
Displays the pixel width being used to display the incoming video signal on the
Modero panel.
• Maximum available screen width on a CV7 Modero panel is 800 pixels.
Displays the pixel height being used to display the incoming video signal on the
Modero panel.
• Maximum available screen height on a CV7 Modero panel is 480 pixels.
Displays the video refresh rate applied to the incoming video signal from the
panel. Default rate is 60.
Displays the degree of rotation applied to the on-screen image.
Displays the first touch panel page assigned for display after the device is
powered-up.
• This information is taken from the TPD4 project file.
• Most projects begin with a Main page.
Displays the start-up string.
Displays the wake up string used after an activation from a timeout.
Displays the sleep string used during a panel's sleep mode.
Displays the amount of Compact Flash memory available on the Modero panel.
Displays the available RAM (or Extended Memory module) on the Modero
panel.
Date Display
fields
7" Modero Widescreen Touch Panels