Sensor Setup - AMX NXD-CV7 Instruction Manual

G4 Web Control Page Elements (Cont.)
G4 Web Control Settings
(Cont.):
Web Control Port
Maximum Number of
Connections
Current Connection Count
G4 Web Control Timeout:
FIG. 89 Sample relationship between G4 Web Control and NetLinx Security-Mange WebControls window
Refer to the Using G4 Web Control to Interact with a G4 Panel section on page 71 for more
detailed instructions on how to use the G4 Web Control page with the new web-based NetLinx
Security application.

Sensor Setup

The Sensor Setup page (FIG. 90) allows you to adjust the Light and Motion Sensor parameters on a
Modero touch panel.
FIG. 90 Sensor Setup page
7" Modero Widescreen Touch Panels
Allows you to enter the port value that the VNC Web Server runs on.
• Default value is 5900.
This read-only field displays the maximum number of users that can be
simultaneously connected to the target panel via the web.
• Default value is 1.
This read-only field displays the current number of users connected to the
target panel via the web. This value cannot exceed the Maximum number field.
Sets the length of time (in minutes) the panel can remain idle (no cursor
movements) before the session is closed and the user is disconnected.
• Minimum value = 0 minutes (panel never times-out)
• Maximum value = 240 minutes (panel times-out after 240 minutes/4hours)
Firmware Pages and Descriptions
101