AMX NXD-CV7 Instruction Manual page 80

Configuring Communication
FIG. 65 G4 Web Control page
6. Press the Enable/Enabled button until it toggles to Enabled (light blue color).
7. The Network Interface Select field is read-only and displays the method of communication to
the web. Verify you have selected the proper interface connection as this field does not
auto-detect the connection type being used (see below).
8. Press the Web Control Name field to open the Web Name keyboard.
9. From the Web Name keyboard, enter a unique alpha-numeric string to identify this panel. This
information is used by the NetLinx Security Web Server to display on-screen links to the panel.
The on-screen links use the IP Address of the panel and not the name for communication
(FIG. 66).
FIG. 66 Sample relationship between G4 Web Control and NetLinx Security-Mange WebControls window
10. Press Done after you are finished assigning the alpha-numeric string for the Web Control
name.
11. Press the Web Control Password field to open the Web Password keyboard.
72
Wired is used when a direct Ethernet connection is being used for communication to the
web. This is the default setting if either no wireless interface card is detected or if both an
Ethernet and wireless card connection is detected by the panel.
Wireless is used when a wireless card is detected within the internal card slot. This
method provides an indirect communication to the web via a pre-configured Wireless
Access Point.
7" Modero Widescreen Touch Panels