Wizard Setup Configuration: Connection Tests - Telkom ADSL 5100 Instruction Manual

LABEL
LAN IP Address Enter the IP address of your TELKOM ADSL 5100 in dotted decimal notation, for
example, 10.0.0.2 (factory default).
LAN Subnet Mask Enter a subnet mask in dotted decimal notation.
DHCP
DHCP Server From the DHCP Server drop-down list box, select On to allow your TELKOM ADSL
5100 to assign IP addresses, an IP default gateway and DNS servers to computer
systems that support the DHCP client. Select Off to disable DHCP server.
When DHCP server is used, set the following items:
Client IP Pool This field specifies the first of the contiguous addresses in the IP address pool.
Starting Address
Size of Client IP This field specifies the size or count of the IP address pool.
Pool
Primary DNS Enter the IP addresses of the DNS servers. The DNS servers are passed to the
Server DHCP clients along with the IP address and the subnet mask.
Secondary DNS As above.
Server
Back
Click Back to go back to the first wizard screen.
Finish Click Finish to save the settings and proceed to the next wizard screen.

3.13 Wizard Setup Configuration: Connection Tests

The TELKOM ADSL 5100 automatically tests the connection to the computer(s) connected to the
LAN ports. To test the connection from the TELKOM ADSL 5100 to the ISP, click Start Diagnose.
Otherwise click Return to Main Menu to go back to the Main Menu screen.
DESCRIPTION
24