Sua (Single User Account) Versus Nat; Sua Server - Telkom ADSL 5100 Instruction Manual

Server

6.2 SUA (Single User Account) Versus NAT

SUA (Single User Account) is a implementation of a subset of NAT that supports two types of
mapping, Many-to-One and Server. The TELKOM ADSL 5100 also supports Full Feature NAT to
map multiple global IP addresses to multiple private LAN IP addresses of clients or servers using
mapping types as outlined in

6.3 SUA Server

A SUA server set is a list of inside (behind NAT on the LAN) servers, for example, web or FTP, that
you can make visible to the outside world even though SUA makes your whole inside network
appear as a single computer to the outside world.
You may enter a single port number or a range of port numbers to be forwarded, and the local IP
address of the desired server. The port number identifies a service; for example, web service is on
port 80 and FTP on port 21. In some cases, such as for unknown services or where one server
can support more than one service (for example both FTP and web service), it might be better to
specify a range of port numbers. You can allocate a server IP address that corresponds to a port
or a range of ports.
Many residential broadband ISP accounts do not allow you to run any server processes (such as
a Web or FTP server) from your location. Your ISP may periodically check for servers and may
suspend your account if it discovers any active services at your location. If you are unsure, refer to
your ISP.
Default Server IP Address
In addition to the servers for specified services, NAT supports a default server IP address. A
default server receives packets from ports that are not specified in this screen.
6.3.1 Port Forwarding: Services and Port Numbers
A NAT server set is a list of inside (behind NAT on the LAN) servers, for example, web or FTP, that
you can make accessible to the outside world even though NAT makes your whole inside network
appear as a single machine to the outside world.
Use the SUA Server page to forward incoming service requests to the server(s) on your local
ILA2 IGA2
ILA3 IGA3
...
Server 1 IP IGA1
Server 2 IP IGA1
Server 3 IP IGA1
40