Telkom ADSL 5100 Instruction Manual page 18

The following table describes the labels in this screen.
LABEL
Service Name Type the name of your PPPoE service here.
User Name Configure User Name and Password fields for PPPoA and PPPoE encapsulation
only. Enter the user name exactly as your ISP assigned. If assigned a name in the
form
components exactly as given.
Password Enter the password associated with the user name above.
IP Address A static IP address is a fixed IP that your ISP gives you. A dynamic IP address is not
fixed; the ISP assigns you a different one each time you connect to the Internet. The
Single User
Account feature can be used with either a dynamic or static IP address.
Select Obtain an IP Address Automatically if you have a dynamic IP address;
otherwise select Static IP Address and type your ISP assigned IP address in the IP
Address text box below.
Connection Select Connect on Demand when you don't want the connection up all the time and
specify an idle time-out (in seconds) in the Max. Idle Timeout field. The default
setting selects Connection on Demand with 0 as the idle time-out, which means the
Internet session will Select Nailed-Up Connection when you want your connection
up all the time. The TELKOM ADSL 5100 will try to bring up the connection
automatically if it is disconnected.
Network Address
Select None, SUA Only or Full Feature from the drop-sown list box. Refer to the
Translation NAT chapter for more details.
Back Click Back to go back to the first wizard screen.
user@domain where domain identifies a service name, then enter both
DESCRIPTION
18