1. Manuals
  2. Brands
  3. Telkom Manuals
  4. Network Router
  5. ADSL 5100
  6. Quick start manual

Telkom ADSL 5100 Quick Start Manual

Hide thumbs Also See for ADSL 5100:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Instruction Manual
Telkom ADSL 5100 Router
Quick Start Guide

Advertisement

Table of Contents
loading

Related Manuals for Telkom ADSL 5100

Summary of Contents for Telkom ADSL 5100

  • Page 1 Telkom ADSL 5100 Router Quick Start Guide...

  • Page 2: Package Contents

    Do not use the same power source for the Telkom ADSL 5100 as other equipment. Do not open or try to repair the Telkom ADSL 5100 yourself. If the Warning Telkom ADSL 5100 gets too hot, turn off the power immediately and contact technical support on 0860 2C HELP (0860 22 43 57) Place the Telkom ADSL 5100 on a stable surface.

  • Page 3: The Front Leds

    Quick Start Guide The Front LEDs Figure 1 Meaning Lit steady when there is a PPPoE connection using the internal PPP : PPPoE of the router. Lit steadily when successfully connected to an ADSL DSLAM ADSL: (“linesync”). Lit when connected to an Ethernet device. LAN Port Green for 100Mbps;...

  • Page 4: The Rear Ports

    10Mbps or 100Mbps. You may use a straight or a crossover cable. connector) Console port is used for technical support purpose only. CONSOLE (Do not use unless requested to do so by Telkom) Connect the protected (“out”) RJ-11 plug of the integrated surge LINE and power unit into this jack.

  • Page 5: Hardware Installation

    (F). c) Confirm that the corresponding LAN LED is lit. d) You can connect up to 4 network devices directly to the Telkom ADSL 5100 as shown in the overview sketch. 4. Connect the ADSL micro filters a) If you also intend to use traditional telephones (for voice calls) on the ADSL line, you need to connect the included ADSL micro filters.
  • Page 6 The following sections of this guide are only applicable to users running Microsoft Windows operating systems. If you are running a different operating system, please refer to the manual for assistance in installing the Telkom ADSL 5100.

  • Page 7: Configuring Pc In Windows Xp

    Quick Start Guide Configuring PC in Windows XP 1. Go to Start / Control Panel (switch to Classic View). In the Control Panel, double-click on Network Connections 2. Double-click Local Area Connection. 3. In the Local Area Connection Status window, click Properties. 4.

  • Page 8: Configuring Pc In Windows 2000

    Telkom ADSL 5100 Configuring PC in Windows 2000 Go to Start / Settings / Control Panel. In the Control Panel, double-click on Network and Dial-up Connections. 2. Double-click Local Area Connection. 3. In the Local Area Connection Status window click Properties.

  • Page 9: Configuring Pc In Windows 98/Me

    Quick Start Guide Configuring PC in Windows 98/Me 1. Go to Start / Settings / Control Panel. In the Control Panel, double-click on Network and choose the Configuration tab. 2. Select TCP/IP -> NE2000 Compatible, or the name of your Network Interface Card (NIC) in your PC.
  • Page 10 Telkom ADSL 5100 Configuring PC in Windows NT4.0 1. Go to Start / Settings / Control Panel. In the Control Panel, double-click on Network and choose the Protocols tab. 2. Select TCP/IP Protocol and click Properties. 3. Select the Obtain an IP address from a DHCP server radio button.
  • Page 11 Configuring Your Telkom ADSL 5100 Now that the hardware installation is complete you will need to perform certain actions to complete the installation. All these actions are made easy by using the enclosed Telkom ADSL 5100 CD. In this section you will: 1) Verify that your computer meets the minimum requirements for Telkom ADSL 2) Test your guest account connection to the www.telkom.co.za website...
  • Page 12 If you are able to see the Telkom website, please proceed to the next step. If you do not see the Telkom website, please make sure that you have performed the previous steps of this quick guide correctly. If the problem persists, contact technical support on 0860 2C HELP (0860 22 43 57).
  • Page 13 The utility will open with all the fields preset to Telkom’s default settings for when using a routed connection. Should you require different settings and/or a bridged connection then select “Manual Configuration”...
  • Page 14 CD. It is recommended that you read this manual should you want to make use of some of the advanced features on the Telkom ADSL 5100. The manual is in Adobe Acrobat PDF format and requires Acrobat reader to open the file.

  • Page 15: Troubleshooting

    “Menu.exe”. This will start the menu from which you may proceed with the installation. Problem Description 3: When I click OK on the Telkom ADSL 5100 utility window (figure 5), it does not seem to respond. Solution: Please make sure that you have disabled all firewall software on your computer that may block traffic to the router.

  • Page 16: Product Support And Contact Information

    ISDN modem. Please change this setting to use the LAN. 2. You may have misspelled your ISP username and password. Open the utility again by using “Start” > “Programs” > “Telkom ADSL 5100 Utility v1.00k” and re-enter your details. Remember that the username and password is case-sensitive. Type them exactly as provided by your ISP.

This manual is also suitable for:

5100

Table of Contents