Telkom ADSL 5100 Instruction Manual page 54

The following table describes the labels in this screen.
LABEL
Server Type Each of these labels denotes a service that you may use to remotely manage the
TELKOM ADSL 5100.
Access Status Select the access interface. Choices are All, LAN Only, WAN Only and Disable.
Port This field shows the port number for the remote management service. You may
change the port number for a service in this field, but you must use the same port
umber to use that service for remote management.
Secured Client IP The default 0.0.0.0 allows any client to use this service to remotely manage the
TELKOM ADSL 5100. Type an IP address to restrict access to a client with a
matching IP address.
Apply Click Apply to save your settings back to the TELKOM ADSL 5100.
Cancel Click Cancel to begin configuring this screen afresh.
DESCRIPTION
54