Getting Started Using A Wireless Connection - Telkom ADSL 5102G Quick Start Manual

Quick Start Guide
5102G. The manual is in Adobe Acrobat PDF format and requires Acrobat reader
to open the file.
If you do not have Acrobat reader installed on your PC. Click on the "Install
Acrobat Reader...." hyperlink to the immediate right of the manual button, select
your operating system and click install.

Getting Started using a wireless connection:

1. To ensure wireless security "out-of-the-box", Telkom distributes each 5102G with
a unique WPA pre-shared key already setup on your router. This pre-shared key is
printed on a sticker on the back panel of the router.
2. In order to establish a wireless connection to the 5102G, you will need to setup
your wireless client (e.g. laptop with built in wireless module, wireless PCI card or
USB stick) with this pre-shared key. Please consult the security section on the
manual of your specific wireless client device for instructions on how to do this.
3. Should you wish to alter this pre-shared key, please refer to section 4.2.3 of the
online manual. To view the on-line manual, click on 'Start" , then "Run" and type
"D:\manual\manual.pdf" in the space provided (where D represents your CD
drive's drive letter)
16
ü
You have now completed the Telkom ADSL 5102G setup
(for Windows 98, 98SE, ME or NT4) and should now be
able to browse the Internet. Please do not proceed with
the next steps as they are only intended for Windows XP
and 2000 us ers. If you can not browse the Internet,
please refer to the troubleshooting section at the back of
this quick start guide.
ü
This guide provides assistance to setup the router to connect to
the Internet. For other services such as e -mail setup, please
contact your ISP (Internet Service Provider) for details.