Table of Contents
Advertisement
DHCP requests and responses bet
IP address of the actual, remote DHCP server in the Remote DHCP Server field in th
case.
When DHCP is used, the f
LAN Subnet Mask
Enter a subnet mask in dotted decimal notation.
Client IP Pool
This field specifies the first of the contiguous addresses in the IP address pool.
Starting Address
Size of Client IP
This field specifies the size or count of the IP address pool.
Pool
Primary DNS
Enter the IP addresses of the DNS servers. The DNS serv
Server
DHCP clients along with the IP address and the s
Secondary DNS
As above.
Server
Remote DHCP
If Relay is selected in the DHCP field above then enter the IP
Server
remote DHCP server here.
TCP/IP
IP Address
Enter the IP address of your TELKOM ADSL 5100 in dotted de
example, 1
IP Subnet Mask
Type the subnet mask assigned to you by your ISP (if given).
RIP Direction
Select the RIP direction from None, Both, In Only and Out Only.
RIP Version
Select the RIP version from
Multicast
IGMP (Internet Group Multicast Protocol) is a session-layer protocol used to establish
membership in a multicast group. The TELKOM ADSL 5100 supports both IGMP
version 1 (IGMP-v1) and IGMP-v2. S
Apply
Click this button to save these settings back to the TELKOM ADSL 5100.
Cancel
Click this button to reset the fields in this screen.
ollowing items need to be set:
0.0.0.2 (factory default).
RIP-1, RIP-2B and RIP-2M.
ween the remote
server and the clients. Enter the
ers are passed to the
ubnet mask.
elect None to disable it.
is
address of the actual
cimal notation, for
30
- Quick Links:
- Wizard Setup Introduction
Hide quick links:
Advertisement
Table of Contents
