Resetting The Telkom Adsl 5100 - Telkom ADSL 5100 Instruction Manual

screen appears as shown.
The following table describes the labels in this screen.
LABEL
Old Password
New Password
Retype to Confirm
Apply
Cancel

2.5 Resetting the TELKOM ADSL 5100

If you forget your password or cannot access the TELKOM ADSL 5100, you will need to use the
RESET button the back of the TELKOM ADSL 5100. This means that you will lose all
configurations that you had previously made and the speed of the console port will be reset to the
default of 9600Mbps with 8 data bit, no parity, one stop bit and flow control set to none. The
password will be reset to "admin", also. If this does not work then contact the helpdesk 0860 2C
HELP (0860 22 43 57) as you might need to upload a new configuration file. (Do not attempt this
unless requested to do so by the helpdesk)
DESCRIPTION
Type the default password or the existing password you use to access the
system in this field.
Type the new password in this field.
Type the new password again in this field.
Click Apply to save your changes back to the TELKOM ADSL 5100.
Click Cancel to begin configuring this screen from the start..
11