Chapter 9; Remote Management Overview - Telkom ADSL 5100 Instruction Manual

Remote Management Configuration
This chapter provides information on configuring remote management. Remote management is
not available on all models

9.1 Remote Management Overview

Remote management allows you to determine which services/protocols can access which
TELKOM ADSL 5100 interface (if any) from which computers.
You may manage your TELKOM ADSL 5100 from a remote location via:
To disable remote management of a service, select Disable in the corresponding Server Access
field.
9.1.1 Remote Management Limitations
Remote management over LAN or WAN will not work when:
1. A filter is applied to block a Telnet, FTP or Web service.
2. You have disabled that service in one of the remote management screens.
3. The IP address in the Secured Client IP field does not match the client IP address. If it
does not
4. There is a console session running.
5. There is already another remote management session of the same type (web, FTP or
Telnet) running. You may only have one remote management session of the same type
running at one time.
6. There is a web remote management session running with a Telnet session. A Telnet
session will be disconnected if you begin a web session; it will not begin if there already
is a web session.
9.1.2 Remote Management and NAT
When NAT is enabled:
Use the TELKOM ADSL 5100's WAN IP address when configuring from the WAN.
Internet (WAN only)
LAN only

Chapter 9

ALL (LAN and WAN)
Neither (Disable)
52