Enet Encap - Telkom ADSL 5100 Instruction Manual

Next Click Next to continue to the next wizard screen.
3.10.2 RFC 1483
Select RFC 1483 from the Encapsulation drop-down list box in the first wizard screen to display
the screen as shown.
The following table describes the labels in this screen.
LABEL
IP Address This field is available if you select Routing in the Mode field.
Type your ISP assigned IP address in this field.
Network Address Select None, SUA Only or Full Feature from the drop-sown list box. Refer to the
NAT chapter for more details.
Translation
Network Address Select None, SUA Only or Full Feature from the drop-sown list box. Refer to the
Translation NAT chapter for more details.
LABEL
Back Click Back to go back to the first wizard screen.
Next
Click Next to continue to the next wizard screen.

3.10.3 ENET ENCAP

Select ENET ENCAP from the Encapsulation drop-down list box in the first wizard screen to
display the screen as shown.
DESCRIPTION
DESCRIPTION
19