ATCOM 5520 User Manual page 27

、
Create new SMS
1) Press MORE (soft button 4)
2) Press SMS(soft button 2）
3) Press New(soft button 1)
4) Edit SMS context and you can switch the input method by press # such as
ABC(capital letters) ，abc ( lower case letters) , 123 ( number).
5) When the edit is done, press Send(soft button 2）and input receiver's
phone number.
A、press Sear(soft button 1) to find the contact person in phonebook
B、directly input receiver's phone number
C、Use P2P method , input # + IP address ( press * twice to input #)
For example if you send the SMS to the phone with IP address of
192.168.1.88, you will press **192*168*1*88 After inputing receiver's
address, press Send(soft button 2) to send out your message.
SMS Check new SMS
When there is a new SMS, LCD will show New Message(S)
6) Press More(soft button 4).
7) Press MS(soft button 2） , LCD will display Number New Number old.
8) If there is a new SMS and 2 old SMS, LCD will display 1 New 2 Old.
9) Press OK (soft button2) to enter SMS list , if it's unread , there will be a NEW
before it , or else it has been read. 10) Press up and down key in navigation
keyboard to select the message and press OK(soft button2) to read it. 11) If
you want to delete the SMS , just press Del(soft button 1) after you select it.
12) If you want to reply the message,just press Repl(soft button 2) after you
select it.
In SMS list, you can press quit (soft button) to go to the upper menu
Dial means dial to call sender directly when you are reading his SMS
Edia means call the sender after edit his number .
Edit means editing the SMS context.
27