ATCOM 5520 User Manual page 28

、
There are 2 models to set the authority of web accessing and command line: Guest
model and Admin model. User could view and configure all items in Admin mode.
While guest couldn't change the SIP (1-2) and IAX2 configuration as well as server
address and port but only access and view the information.
User would enter different mode after input different user name and password:
Guest Model:
o
Admin Model:
o
、
Press the up or down navigation button to check the phone's current IP address.
、
Enter 5520 IP addresses in the web browser to go to the log on page, and key in
the username and password to access 5520 setting page. Default username and
password is:
Username:
Username:
Username：guest
Username：admin
123
password:
password:
Password：guest
Password：admin
28