ATCOM 5520 User Manual page 20

C、Answer by earphone
Keep your earphone connected with the RJ9 earphone jack, when there is an
incoming call, press the earphone button on the IP phone and talk with the
caller. If you want to hang up, please press the earphone button again.
D、Handset to hand-free
When you are phoning with the handset and want to phone with hand-free
mode, please press the hand-free button and put down the handset.
E、Hand-free mode to handset
If you are calling under hand-free mode and want to change to speaker phone,
juts pick up the handset without press any buttons.
、
A、Use the handset
Pickup the handset, the LCD will show the current lines (user could switch
between line1 to line4 by pressing the line button beside the LCD). User can
input the number with the keyboard and press # to send the number. When you
hear the tones of "du~~du~~" with dialed number showed on the LCD, the
called's phone is ringing. If the called answer the call, the phone call is
established and the LCD will show the calling time and the called's number.
B、Answer the phone under hand-free mode
Press the Speaker Phone button, the LCD will show the current lines (user
could switch between line1 and line2 by pressing the line button beside the
LCD). User can input the number with the keyboard and press # to send the
number. When caller hear the tones of "du~~du~~" with dialed number
showed on the LCD, the called's phone is ringing. If the called answers the call,
the phone call is established, and the LCD will show the calling time and the
called's number.
C、Used phone book
a、Pick up the handset.
b、Press " Menu" button and use the "up" and "down" keys to enter
phonebook.
c、Press "OK" to show the total amount in telephone.
d、Press "OK" to enter the phone list and use "up" and "down" keys to find the
20