ATCOM 5520 User Manual page 10

C、Repeat A and B. It is the right picture of putting on desk after fixing the two
feet below:
D、Disassemble the feet: Press the plate with word "PUSH" and pull the feet with
the direction of arrow. When the plate is pull out of the slot (there will be a
sound of "pa") you can take off the feet
2、On wall postion A、Put the bottom side of the IP phone upside and push
the plate with letter "PUSH" into the slot, please refer the picture as below:
B、Push the other plate into the slot in accordance with the direction of the arrow
10