EWM WEGA 351 Operating Instructions Manual page 33

Item Symbol Description
6
7
8
9
10
Item No.: 099-004934-EWM01
0
"Operating mode" key button
Non-latched
Latched
MIG spots (parameter selection t1 is carried out using the "Runtime
parameters" button, setting on the "Rotary transducer".
Interval (parameter selection, t1 = pulse time, t2 = pulse pause, carried out
using "Runtime parameter" button, setting on the "Rotary transducer".
"Runtime parameters" button
The parameters are set on the rotary transducer
Gas post-flow time (0.0 s to 10.0 s)
Wire burn-back (-50% to +50%)
Spot time / pulse time (0.1 s to 5.0 s)
Pulse pause (0.1 s to 2.0 s)
"Top" display
Displays welding voltage or person who designated the runtime parameters
"Down" display
Display of wire feed speed, welding current and runtime parameters.
"HOLD" signal light
After each completed welding process, the last parameter values used for the welding
process are shown on the display; the signal light is on.
Functional characteristics
Machine control – Operating elements
33