Transmission Gear Oil - KYMCO Vitality 50 Owner's Manual

TRANSMISSION GEAR OIL

2-STROKE
Transmission oil measurement:
1. Place the scooter on its main stand on leve
2. After the engine has been shut off for 2 – 3 minutes, rem
the drain plug bolt (1) and check the oil level (2). It should be up
to the rim of the hole. If the level is low, add oil.
3. After refilling, secur ely tigh
• Recommended Gear Oil: SAE#90
•
Capacity / Refilling Capacity: 0.12L / 0.11L
Transm ission oil replacement:
1. Pla ce the scooter on level ground.
2. Pla ce a container under the engine.
3. Remo ve the oil filter bolt (1
4. Re install the drain plug and tighten it.
5. Fill the engine with oil and install the drain plug bolt.
6. S rt he engine and let it warm up for a few minutes. ta t
7. Whi e l the engine is warming up, check fo
If oil is leaking stop the engine immediately and look for the cause.
l ground.
ten the bolt (1).
) and drain plug (3) to drain the oil.
r oil leakage.
- 51 -
ove