KYMCO Vitality 50 Owner's Manual page 59

TRA NSMISSION GEAR OIL
4-STR OKE
Transmis sion oil measurement:
1. Place the scooter on its main stand on level ground.
2. Af
ter the engine has been shut off for 2 – 3 minutes, rem
the il o filler bolt (1) and check the oil level (2). It
to the rim of the hole. If the level is low, add oil.
3. Afte r refilling, securely tighten the bolt (1).
•
Recommended gear oil: SAE#90
•
Capacity / Refilling Capacity: 0.11L / 0.10L
Transmission oil replacement:
1. Place the scooter on level ground.
2. Place a container under the engine.
3. Remove the oil filer bolt (1) and drain plug (3) to drain the oil.
4. Reinstall the drain plug and tighten it.
5. Fill the engine with oil and install the oil filler bolt.
6. While the engine is warming up, check for oil leakage.
If oil is leaking stop the engine immediately and look for the cause.
ove
shoul d be up
- 53 -