Table of Contents
Advertisement
• This scooter
model comes with a battery that DOES NOT
require refilling of distilled water.
• When cleaning the termin
battery cover on the floorboard and then o
• If the battery termin
als are co
and clean it.
• After cleaning, apply a thin coat of grease or Vaseline to the
battery terminals and then install the battery.
• Never open the closed-type battery electrolyte cap.
• The battery discharges electricity when the scooter
is not used for a long period of time. Remove the
battery and put it in a cool place after it is fully
charged to prevent electricity leakage.
• If the scooter will not be used for a long pe
remove th
e negative ( - ) terminal.
•
Do not smoke or allow flames or sparks near the battery
while removing and installing it.
• Turn "OFF" the ignition switch before removal or
installation.
• The negative ( - ) terminal should be removed first and the
positive ( + ) terminal should be installed first.
• Tighten the loose terminal nuts securely.
als, remove the screws attaching the
pen the battery cover.
rroded, take the battery out
riod of
time
- 47 -
Hide quick links:
Advertisement
Table of Contents
