Transmission Gear Oil - KYMCO Sento 50 Owner's Manual

(7) TRANSMISSION GEAR OIL

Check the transmission gear oil tank for leakage.
1.Place the motorcycle on its main stand on level ground. After
the engine stops for 2～3 minutes, remove the gear oil check
bolt to check the oil level.
2.If the oil level is lower than the check bolt hole lower edge, add
gear oil to the lower edge.
3.After refilling, securely tighten the check bolt.
Recommended Gear Oil: SAE90#
Gear Oil Filler Oil Bolt(Check Bolt Hole)
Drain Bolt
Oil Level.
※ CAUTION:
Add gear oil through the oil check bolt hole.
After refilling, use a rag to wipe clean.
Excess or insufficient gear oil will affect the engine
performance.
Never use gear oil of different brand or inferior quality which
may result in engine breakdown.
Change gear oil at first 300km and then change at every
5000km. Add specified gear oil whenever it is necessary.
Capacity/Exchanging capacity:0.11L/0.1L-SENTO/KIWI 50
Capacity/Exchanging capacity:0.12L/0.1L-KIWI 100
34