Transmission Gear Oil - KYMCO B&W 150 Owner's Manual

(7) TRANSMISSION GEAR OIL

Check the transmission gear oil tank for leakage.
1.Place the motorcycle on its main stand on level ground.
After the engine stops for 2 3 minutes, remove the gear
oil check bolt to check the oil level.
2.If the oil level is lower than the check bolt hole lower edge,
add gear oil to the lower edge.
3.After refilling, securely tighten the check bolt.
Recommended Gear Oil: SAE90
Capacity / Exchanging Capacity: 0.2 L / 0.18 L
Gear Oil Filler Oil (Check Bolt Hole)
Oil Level
CAUTION:
Add gear oil through the oil check bolt hole.
After refilling, use a rag to wipe clean.
Excess or insufficient gear oil will affect the engine
performance.
Never use gear oil of different brand or inferior quality
which may result in engine breakdown.
Change gear oil at first 300km and then change at every
5000km. Add specified gear oil whenever it is necessary.
～
Drain Bolt
35