Panasonic Lumix DMC-G1K Operating Instructions Manual page 93

Advanced (Recording pictures)
Select this when you want to take pictures at a wedding reception, an indoor party etc.
This allows you to take pictures of people and the background with near real-life
brightness.
• Technique for Party mode
- Open the flash. (You can set to
[~].)
- We recommend using a tripod and the self-timer for taking pictures.
- We recommend rotating the zoom ring to Wide (1 x) and being about 1.5 m (4.92 feet) from the
subject when taking pictures.
_Note
- The initial setting for [AF MODE] is
Et~].
This takes pictures of a baby with a healthy complexion. When you use the flash, the light
from it is weaker than usual.
You can set different birthdays in [BABY1] and [BABY2]. You can then display the ages
when playing back the pictures.
BIRTHDAY SET.
~
BABY1
.
··MiktjjJmj,Ei~j1J~
WITHOUT AGE
: CANCEl'·· SELECT:
• Age display setting
- To have the age displayed, first set the birthday and then be sure to
set [WITH AGE] before taking the pictures.
• Birthday setting
1 Press
./T
to select [BIRTHDAY SET.] and then press
[MENU/SET].
2 Press
~/~
to select items (Year/Month/Day) and then
press
./T
to set them.
- If [WITH AGE] is set when the birthday has not been registered, the setting screen
appears automatically.
3 Press [MENU/SET] to set.
- You can also use the front dial to set.
• To cancel [AGE]
Set to [WITHOUT AGE] in step 1 of "Birthday setting".
Note
- The age can be printed out using the "PHOTOfunSTUDIO-viewer-" bundled software on the
CD-ROM (supplied).
-If the camera is set to [WITHOUT AGE], the age is not recorded even if the time and birthday
are set. This means the age cannot be displayed even if camera is set to [WITH AGE] after
taking the pictures.
-Intelligent ISO sensitivity control is activated, and maximum ISO sensitivity level becomes
[IS0400].
-If the camera is turned on with [BABY1]/[BABY2] set, the age is displayed at the lower left of
the screen for about 5 seconds, along with the current date and time.
-If the age is not properly displayed, check the clock and birthday settings.
- The birthday setting can be reset with [RESET].
- The initial setting for [AF MODE] is
[~].
VQT1U32
93