Panasonic Lumix DMC-G1K Operating Instructions Manual page 34

Preparation
Set the screen that is displayed when the mode dial is set to
(]J,
~,
a,
~,
fl!
and
e·
[OFF]: The recording screen in the currently selected
~
[SCENE MENU]
advanced scene mode (P88) or scene mode (P92)
appears.
[AUTO]: The advanced scene mode or scene mode menu
screen appears.
Select the USB communication system after or before connecting
the camera to your PC or your printer with the USB connection
cable (supplied).
~.
[SELECT ON CONNECTION]:
~l·(USB
MODE]
Select either [PC] or [PictBridge(PTP)] if you connected the
camera to a PC or a printer supporting PictBridge.
~
[PC]:
Set after or before connecting to a PC.
e
[PictBridge(PTP)]:
Set after or before connecting to a printer supporting PictBridge.
- When [PC] is selected, the camera is connected via the "USB Mass Storage" communication
system.
- When [PictBridge(PTP)] is selected, the camera is connected via the "PTP (Picture Transfer
Protocol)" communication system.
~
(FORMAT]
The card is formatted.
Formatting irretrievably deletes all the data so check the data
carefully before formatting.
- Use a battery with sufficient battery power or the AC adaptor (P132) when formatting. Do not
turn the camera off during formatting.
-If the card has been formatted on a PC or other equipment, format it on the camera again.
-If the card cannot be formatted, consult your nearest Service Center.
For USA assistance, please call:
1-800-211-PANA(7262) or, contact us via the web at.
http://www.panasonic.com/contactlnfo
34
VQT1U32
For Canadian assistance, please call:
1-800-99-LUMIX (1-800-995-8649) or
send e-mail to:lumixconclerge@ca.panasonic.com
-