Panasonic Lumix DMC-G1K Operating Instructions Manual page 33

Preparation
Set the format for the HOMI output when playing back on the
HOM I compatible high definition TV connected with this unit using
the HOMI mini cable (optional).
[AUTO]:
The output resolution is automatically set based on the
Hcrm[HDMI MODE]
information from the connected TV.
[1080i]:
The interlace method with 1080 available scan lines is used for
output.
[480p]:
The progressive method with 480 available scan lines is used for
output.
-Interlace method/progressive method
i= interlace scanning is scanning the screen with half of the effective scanning lines every 1/60
seconds, where p= progressive scanning is a high density image signal that is scanning the
screen with all the effective scanning lines every 1/60 seconds.
The [HOMI] terminal on this unit is compatible with high definition output [1 08Di]. It is necessary
to have a compatible TV to enjoy progressive and high definition images.
-If the images are not output on the TV when the setting is [AUTO], match with the image format
your TV can display, and select number of effective scanning lines. (Please read the operating
instructions for the TV.)
-This will work when the HOMI mini cable (optional) is connected.
- Refer to P125 for details.
Setup so this unit can be controlled by the remote control of the
VIERA by automatically coupling this unit with the VI ERA Link
compatible equipment using HOMI mini cable (optional).
VI~!~
[VIERA Link]
[OFF]: Operation is performed with the buttons on this unit.
[ON]: Remote control operation of the VI ERA Link
compatible equipment is enabled. (Not all operations
are possible)
Button operation of the main unit will be limited.
-This will work when the HDMI mini cable (optional) is connected.
- Refer to P126 for details.
QJ] [LANGUAGE]
Set the language displayed on the screen.
[ENGLlSH]/[FRANCAIS]/[ESPANOL]/[PORTUGUES]
-If you set a different language by mistake, select
[QJ]]
from the menu icons to set the desired
language.
mI
[VERSION DISP.]
This enables the firmware versions of the camera and lens to be
checked.
- [-. -] is displayed as the lens firmware when the lens is not mounted.
VQT1U32
33