Panasonic Lumix DMC-G1K Operating Instructions Manual page 151

Others
-Is the camera connected to the TV correctly?
~
Set the TV input to external input mode.
- Output from the [HDMI] socket is not possible when it is connected to the PC or the printer.
~ Connect it only to the TV.
elv$~reenandthe
camera's LCD monitor are different.
- Depending on the TV model, the pictures may be extended horizontally or vertically or they
may be displayed with their edges cut off.
~
Check [TV ASPECT] setting. (P32)
-Is it connected properly with the HDMI mini cable (optional)? (P125)
~
Confirm that the HOM I mini-cable (optional) is firmly fitted.
-Is the [VIERA Link] on this unit set to [ON]? (P33)
~
Depending on HDMI terminal of the TV, the input channel may not switch automatically. In
this case, use the remote control for the TV to switch input. (For details on how to switch
input, please read the operating instructions for the TV.)
~
Check the VIERA Link setting on the connected device.
~ Turn the power to the unit off and then back on again.
~
Set [VIERA Link] to [Off] on the TV and then turn it back to [On]. (Refer to the operating
instructions of the TV for details.)
,betransf
O_ _' _ . _ ' .
~ · . - . _ > ~
when the' camera is connected't
-Is the camera connected to the PC correctly?
- Is the camera recognized by the PC correctly?
~
Set to [PC] in [USB MODE]. (P34, 118)
~
Disconnect the USB connection cable. Connect it again while the card is inserted in the
camera.
- Pictures cannot be printed using a printer which does not support PictBridge.
~ Set to [PictBridge(PTP)] in [USB MODE]. (P34, 120)
~
When using a printer with a trimming or borderless printing function, cancel this function
before printing. (For details, refer to the operating instructions for the printer.)
~ When you order photo studios to print pictures, ask the photo studio if the pictures can be
printed with both ends.
VQT1U32
151