Panasonic Lumix DMC-G1K Operating Instructions Manual page 127

r..;onnecrmg
ro
orner eqUipmenr
®
Align the marks, and insert.
®
HOM I mini cable (optional)
- Check the direction of the terminals and plug in/out straight holding onto the plug. (It may result
in malfunction by the deforming of the terminal if it is plugged in obliquely or in wrong direction.)
• Playback operation with the remote control for the TV
1)
~"M
"
~~;"I:~
,,-
~
:
,,,¥
.11
,;A:,r;i
I
G
~')t~~'~'~
~
+
2)
o
1) Press the button up, down, left or right to
select a still picture to be played back, and
then press the button in the center to set it.
2) Activate the operation icons that are
displayed on TV screen with the remote
control for the TV.
e
Operation icons
e
Display operation icons
e
Cancel operation icons
G)
Start/Pause the slide show
-It is recommended to connect this unit to an HOMI terminal other than the HOMI1 if there are 2
or more HOMI input terminals on the TV
-When the [VIERA Link] (P33) of this unit is set to [ON], operation using the button on this unit
will be limited.
- VIERA Link must be activated on the connected TV. (Read the operating instructions of the TV
for how to set etc.)
-If you are not using VIERA Link, set [VIERA Link] (P33) to [OFF].
• Other linked operations
Turning the power off:
If you use the remote control for the TV to turn off the power, the power on this unit also
turns off. (When connecting the unit to a PC with a USB cable, the power will not turn off.)
Automatic input switching:
-If you connect with a HOMI mini cable and then turn on the power on this unit, the input channel
on the TV automatically switches to this unit's screen. If the TV's power is in standby status, it
will turn on automatically (if [Set] has been selected for the TV's [Power on link] setting).
- Depending on the HOMI terminal on the TV, the input channel may not switch automatically. In
this case, use the remote control for the TV to switch the input channel. (For details on how to
switch input, please read the operating instructions for the TV)
-If VIERA Link does not work properly, refer to page 151.
Note
-If you are unsure whether or not the TV you are using are compatible with VIERA Link, read the
operating instructions for the devices.
- Available linked operations between this unit and a Panasonic TV is different depending on the
types of Panasonic TVs even if they are compatible with VIERA Link. Refer to the operating
instructions of the TV for the operations that support on the TV
- Operation is not possible with a cable that is not based on the HOMI standard.
We recommend using Panasonic HOMI mini cables (optional).
Part numbers: RP-COHM15 (1.5 m), RP-COHM30 (3.0 m)
- VIERA Link will not work even if you connect the HOMI mini cable while the unit is connected to
the PC or the printer.
VQT1U32
127