Panasonic Lumix DMC-G1K Operating Instructions Manual page 86

Advanced (Recording pictures)
-If you set the shutter speed to [B], [B] is displayed on the screen.
- When you take pictures with the shutter speed set to [B], use a sufficiently charged battery.
(P20)
- We recommend using a tripod or the remote shutter (DMW-RSL 1; optional) when you take
pictures with the shutter speed set to [B]. Refer to P131 for information about the remote
shutter.
- When you take pictures with the shutter speed set to [B], noise may become visible. To avoid
picture noise, we recommend setting [LONG SHTR NR] in the [REG] mode menu to [ON]
before taking pictures. (P1 04)
- The manual exposure assistance does not appear.
Note
-It is possible to change the switching method of aperture and shutter speed settings with the
[EXPO. SETTINGS] (P1 08) in the [CUSTOM MENU] menu.
- The brightness of the LCD monitorNiewfinder may differ from the brightness of the actual
pictures. Check the pictures using the playback screen.
-If the exposure is not adequate, the aperture value and the shutter speed turn red and blink
when the shutter button is pressed halfway.
-
[~A], [~], [~S]
and
[~]
for flash cannot be set.
- The [SENSITIVITY] is automatically set to [IS0100] when you switch the recording mode to
Manual exposure while the [SENSITIVITY] is set to [AUTO] or
[alSO]
(Intelligent).
- If you press the shutter button fully when the shutter speed is slow, the shutter speed on the
screen counts down.
- When you use a lens with an aperture ring, the aperture ring setting takes priority.
86
VQT1U32