Panasonic Lumix DMC-G1K Operating Instructions Manual page 31

Digital camera/lens kit
Table of Contents

Advertisement

Preparation
When the Auto Review function is activated or when playing back,
[Eg
[HIGHLIGHT]
white saturated areas appear blinking in black and white.
[OFF]/[ON]
[OFF]
[ON]
• If there are any white saturated areas, we
recommend compensating the exposure towards
negative (P63) referring to the histogram (P56) and
then taking the picture again. It may result in a better
quality picture.
• There may be white saturated areas if the distance
between the camera and the subject is too close
when taking pictures with the flash.
If [HIGHLIGHT] is set to [ON] in this case, the area directly illuminated by the photo flash will
become white saturated and appear blinking in black and white.
You can conserve the battery life by setting these menus.
Also, it will turn off the LCD monitor automatically when not in use
to prevent discharge of the battery.
cr
Z
[POWER SAVE]:
The camera is automatically turned off if the camera has not been
ECO
[ECONOMY]
used for the time selected on the setting.
[OFF]/[1 MIN.]/[2MIN.]/[5MIN.]/[1 OMIN.]
@ffI [AUTO LCD OFF]:
The LCD monitor is automatically turned off if the camera has not
been used for the time selected on the setting.
[OFF]/[15SEC.]/[30SEC.]
• Press the shutter button halfway or turn the camera off and on to cancel [POWER SAVEl
• [POWER SAVE] is set to [5MIN.] in the Intelligent auto mode.
• [POWER SAVE] is fixed to [2MIN.] when [AUTO LCD OFF] is set to [15SEC.] or [30SEC.].
• Press any button to turn on the LCD monitor again.
~:~
[MONITOR]I
[VIEWFINDER]
Brightness and color of the LCD monitor/viewfinder can be
adjusted in 7 steps.
• Adjust the brightness of the screen with AfT, contrast and saturation
with .....
f~
or the front dial.
·It will adjust the LCD monitor when the LCD monitor is in use, and the
viewfinder when the viewfinder is in use.
These menu settings make it easier to see the LCD monitor when
you are in bright places.
[OFF]
ILCDI
[LCD MODE]
~
[AUTO POWER LCD]:
The brightness is adjusted automatically depending on how bright
it is around the camera.
~
[POWER LCD]:
The LCD monitor becomes brighter and easier to see even when
taking pictures outdoors.
VQT1U32
31

Advertisement

Table of Contents
loading

Table of Contents