Advanced (Playback)
This mode allows you to automatically display pictures vertically if they were recorded
holding the camera vertically or rotate pictures manually in 90° steps.
Select [ROTATE] on the [PLAYBACK] mode menu. (P27)
- The [ROTATE] function is disabled when [ROTATE DISP.] is set to [OFF].
Press .....
/~
to select the picture and then press
[MENU/SET].
- Protected pictures cannot be rotated.
Press
./"f
to select the direction to rotate the
picture and then press [MENU/SET].
, . . :
The picture rotates clockwise in steps of 90°.
~:
The picture rotates counter-clockwise in steps of 90°.
Press [iID] to return to the menu screen.
- Press [MENU/SET] to close the menu.
Press
"f
to select [ON] and then press [MENU/
SET].
- The pictures are displayed without being rotated when you
select [OFF].
- Refer to P49 for information about how to play back pictures.
···'"1
Press [MENU/SET] to close the menu.
flNote
- [ROTATE DISP.] can only be used with the lens compatible (P14) with the direction detection
function (P36).
- When you play back pictures on a PC, they cannot be displayed in the rotated direction unless
the OS or software is compatible with Exit. Exif is a file format for still pictures which allows
recording information etc. to be added. It was established by "JEITA (Japan Electronics and
Information Technology Industries Association)".
-It may not be possible to rotate pictures that have been recorded with other equipment.
112
VQT1U32