Panasonic Lumix DMC-G1K Operating Instructions Manual page 181

Dear Customer
+Please make sure you use the supplied USB connection cable.
-Use of cables other than the supplied USB connection cable may cause malfunction.
+ The surface of the camera and the reverse side of the LCD monitor may
become warm during use. This does not affect the performance or quality
of the camera.
+Never leave the camera and the battery in a car or on a car dashboard in the
summer.
-It may cause leakage of the battery electrolyte. a generation of heat, and may cause a fire
and the battery to burst due to the high temperature.
+ Do not leave the lens and the Viewfinder aimed at the sun or other strong
light sources.
-It may cause damage to inner parts and a fire due to the concentration of light.
+When rotating the LCD Monitor, ensure that it is fUlly open and be careful
not to use excessive force.
-The excessive force causes a malfunction.
+00 not place your hands inside the mount of the digital camera body.
-Since the sensor unit is a precision apparatus, it may cause a malfunction or damage.
+00 not place the lens mount facing downwards. Do not allow the lens
mount contacts to become dirty.
-Damaged or dirty lens contacts may result in malfunctioning or trouble with operation.
VQC6763
+ You can only use an SOHC Memory Card if using cards with 4 GB or more
capacity.
-A 4 GB (or more) Memory Card without an SDHC logo is not based on the SD Standard
and will not work in this product.
+ The LCD monitor turns off although the camera is turned on.
-It will switch to viewfinder display if there is hand or object near the eye sensor.
+ There is a sound from lens unit.
-It is a sound of lens movement or aperture operation when the power is turned [ON] or
[OFF], and it is not a malfunction.
+ The picture cannot be recorded.
The shutter does not activate.
-Is the subject focused?
At the time of purchase, the camera is set so that you cannot take a picture until the
subject is brought into focus. If you want to be able to take a picture when you press the
shutter button fUlly even if the subject is not focused, set [FOCUS PRIORITy] in the
[CUSTOM MENU] menu to [OFF].
+A
flickering vertical line appears on the LCD monitor under fluorescent
light.
- This is characteristic of MOS sensors which serve as the camera's pickup sensors.
This is not a malfunction. This does not affect the pictures you are recording.