Panel Dimensions - Monogram WX08X10002 Design And Installation Manual

1/4" FRAMED PANEL DIMENSIONS
If you choose to install framed panels, they must be cut
to the dimensions shown. The panels will slide into the
frame on the door, drawer and grille.
If the custom panel is less than 1/4" thick and if it fits
loosely in the door frame, it can be backed up with a
piece of filler material or foam tape to improve the fit.
3/4" OVERLAY PANEL DIMENSIONS
For a more custom appearance, overlay panels may be
installed on trimmed models. The overlay panel must be
secured to a 1/4 thick backer panel which slides into the
"
trim. A spacer panel 0.10
"
the overlay and backer panel.
Assemble the panels with glue and screws.
• Center the spacer panel on the backer panel, left to
right and top to bottom. Secure the panels with glue.
• Center the spacer and backer panel on the overlay
panel and secure with glue and screws. Screws must
be countersunk into the backer panel.
Design Guide
Framed Panel Dimensions
1/4" Framed Panel
Overlay Panel Dimensions
1/4" Backer Panel
0.10" Spacer Panel
3/4" Overlay Panel
thick must be placed between
IMPORTANT NOTE: Maximum total
panel weight:
• Fresh food door panel – 30 lbs.
• Freezer drawer panel – 28 lbs.
• Grille Panel – 11 lbs.
A (Width) B (Grille Height)
33-7/8" 8-7/8"
A (Width) B (Grille Height)
33-7/8" 8-7/8"
32-1/2" 7-5/8"
34-1/8" 9"
NOTE: Left-to-right offset is not always equal to
top-to-bottom offset.
729Dia42
7
5/16"
Trim
Door
Reveal
1/4"
Panel
194Dia59
C (FF Height) D (FZ Height)
46-1/16" 21-7/8"
C (FF Height) D (FZ Height)
46-1/16" 21-7/8"
44-11/16" 20-1/2"
46-5/16" 22"
Overlay Panel
Spacer Panel
Backer Panel
IMPORTANT NOTE: Maximum
total weight for the assembled
panels:
• Fresh food door panel –
729Dia87
• Freezer drawer panel – 28 lbs.
• Grille Panel – 11 lbs.
E (FF Width)
16-3/8"
E (FF Width)
16-3/8"
15""
16-5/8"
30 lbs.