Table of Contents
Advertisement
Quick Links
Download this manual
See also:
Owner's Manual
Advertisement
Table of Contents
Related Manuals for Monogram Built-in refrigerators
Summary of Contents for Monogram Built-in refrigerators
- Page 1 Installation Instructions 36” Built-In All-Refrigerators and All-Freezers 31-46148-2 224D2601P001 09-13 GE monogram.com...
-
Page 2: Table Of Contents
– le nettoyage ou toute intervention. PRUDENCE : For Monogram local service in your area, À cause du poids et de la taille de ce produit et 1.800.444.1845. For Monogram service in Canada 1.800.561.3344... -
Page 3: Dimensions And Clearances
Design Guide DIMENSIONS AND CLEARANCES THE INSTALLATION SPACE 25-3/8" Framed Models 35" 25-3/4" Stainless Steel Models Case Width Case Depth product can be adjusted cutout width to fit into a cutout that must be *84" From *83-1/2" Floor to the top case trim Top Frame Rear and will overlap upper... - Page 4 Design Guide CLEARANCES 25" 2" Min. to 15" 130° Door Wall Swing 130° Clearances for two products installed side-by-side with the same (left or right) door swing Allow 2” minimum clearance between the products if clearance to adjacent cabinets or walls is restricted. to prevent door swing interference.
-
Page 5: 130° Door Swing
Design Guide Frameless Cabinets: overlaps cabinets at the top and sides. strips to prevent interference with cabinet door Top View 130° DOOR SWING (factory setting) Scale 1:1... -
Page 6: 90° Door Swing
Design Guide Frameless Cabinets: Refrigerator or Freezer Case Trim cabinets at the top and sides. may require filler strips to prevent interference with cabinet door swing. 23-7/8" for filler strips. From Rear of Unit Cabinet Front 1/4" 1/2" 3/4" 1" 1-1/4"... -
Page 7: Customization Basics
Framed panels Door Handle into the factory installed trim. Or, order black and stainless steel accessory panels from your Monogram dealer. handles of your choice, supplied by your cabinet maker can also be installed on overlay panels. If desired, you may 2 handles. -
Page 8: Panel Dimensions
Design Guide 1/4” FRAMED PANEL DIMENSIONS If you choose to install framed panels, they must be cut to 5/16" Trim on the door and grille. Door Reveal loosely in the door frame, it can be backed up with a piece 1/4"... -
Page 9: Side Panels
Design Guide SIDE PANELS ZUG2 GRILLE PANEL DIMENSIONS Side panels must be used whenever the sides installation of a framed or overlay grille panel. into the side case trim. Secure the panels to the unit with stick-on hook and loop fastener strips. Order the side panels from the cabinet manufacturer. -
Page 10: Installation Instructions
Installation Instructions TOOLS REQUIRED HARDWARE SUPPLIED (Secured to side of unit.) 3 lag screws Stepladder 5 toggles with bolts Water filter bypass plug Supplied Toekick Bucket 4 Washers (Secured to side of unit.) MATERIALS REQUIRED Level ™ Safety glasses Appliance hand truck Pliers panels... -
Page 11: Step 1, Remove Packaging
Installation Instructions CAUTION: STEP 1 REMOVE PACKAGING CAUTION: Product is much heavier at the top than at the bottom – be careful when moving. PRUDENCE : When using a hand truck, handle from side only. PRUDENCE : Le produit est beaucoup outer carton. - Page 12 Installation Instructions STEP 4 INSTALL ANTI-TIP BRACKET WARNING: ANTI-TIP PRECAUTIONS the possibility of tipping forward. AVERTISSEMENT : PRECAUTIONS CONTRE LES BASCULEMENTS de son basculement vers l’avant. attached to the wall in 4 places. Mark the center with a vertical line. on the wall.
- Page 13 Installation Instructions STEP 4 INSTALL ANTI-TIP BRACKET (cont.) Install Wall Toggles: Install Screws and Bolts: in place with each of the holes aligned with drywall and metal studs for stability. Install the wall the correct opening in the bracket and level with the horizontal line.
- Page 14 Installation Instructions STEP 4 INSTALL ANTI-TIP BRACKET Power Cord Locate the power cord inside the left cavity. If it has not (cont.) been adjusted so the plug is easily accessible, do so now. Fresh Food Unit to remove. Move Unit into Final Position Align the tabs on the wall bracket with the openings Freezer Unit in the back of the unit.
- Page 15 Installation Instructions STEP 5 LEVEL UNIT by leveling legs; the rear is supported by adjustable wheels. Both are accessible from the front of the unit. to raise or counterclockwise to lower the unit. and plumb with cabinetry. CAUTION: are limited to a maximum height adjustment of 1”. installer should elevate the unit on a sheet of plywood the top of the opening to shorten the opening.
- Page 16 Installation Instructions STEP 6 SECURE UNIT TO WALL corners of the unit in the access compartment. Look through the access compartment to make sure the rods line up with the anti-tip bracket. Remove the washers and hair pin cotter from the end of the rod.
-
Page 17: Step 7 Adjust Door Swing
Installation Instructions STEP 7 ADJUST DOOR SWING STEP 8 INSTALL GRILLE PANEL (TRIMMED MODELS ONLY) NOTE: When space does not allow the door to swing open fully to 130°, you may change the door swing to a 90° opening. Skip this step if door opening is satisfactory for your installation situation. -
Page 18: Step 9 Install Framed Panels
Installation Instructions STEP 9 INSTALL FRAMED PANELS Right hand models shown. Use the same instructions for left hand models. (TRIMMED MODELS ONLY) IF YOU ARE INSTALLING OVERLAY PANELS, GO TO STEP 10A. Handle Door Trim Trim Door Use Front Holes to Secure Trim Use Rear Holes Standard supplied handle shown... -
Page 19: Step 9A Install Overlay Panels
Installation Instructions STEP 9A INSTALL OVERLAY PANELS Right hand models shown. Use the same instructions for left hand models. Door Trim Handle Trim Door Move Forward For 3/4" Panel Use Front Holes to Secure Handle Use Rear Holes to Secure Trim Supplied handle shown in the overlay panel position. -
Page 20: Step 11 Start Icemaker
Installation Instructions STEP 11 START ICEMAKER STEP 10 CONNECT WATER SUPPLY (FREEZER MODELS ONLY) Icemaker House Freezer Water Supply Water Supply Power Feeler Arm Switch operation automatically. about a quart of water through the tubing into a bucket, then shut off the water. arm. - Page 21 Notes...
- Page 22 Notes...
- Page 23 Notes...
- Page 24 NOTE: While performing installations described in this book, safety glasses or goggles should be worn. For Monogram ® local service in your area, call 1.800.444.1845. NOTE: Product improvement is a continuing endeavor at General Electric. Therefore, materials, appearance and specifications are subject to change without notice.