Basic Specifications - Toshiba B-EX4 T1 Series Product Description

1. OUTLINE

1.4 BASIC SPECIFICATIONS

1) Printing method ................... Thermal direct printing or thermal transfer printing
2) Print head
[GS model]
(1) Total number of dots ...... 832 dots
(2) Dot density ..................... 8 dots/mm
[TS model]
(1) Total number of dots ...... 1,253 dots
(2) Dot density ..................... 11.8 dots/mm (4) Thermal pitch ................ 0.085 mm
[HS model]
3) Print speed
GS model ............................. 3"/sec., 6"/sec., 10"/sec. 12"/sec.
TS model.............................. 3"/sec., 5"/sec, 8"/sec., 10"/sec. 12"/sec.
[HS model]
NOTE: These print speeds are available when printing ratio is less than 15% of the entire label or tag
paper.
4) Format size (W) x (L)
GS model ............................. Max. 104.0 mm x 1500.0 mm
TS model.............................. Max. 104.0 mm x 1500.0 mm
[HS model]
5) Issue mode .......................... Batch
6) Type of bar code/two dimensional code
(1) JAN8, EAN8, JAN13, EAN13, UPC-A, UPC-E
EAN8, EAN13, UPC-A, UPC-E + 2digit
(2)
(3) EAN8, EAN13, UPC-A, UPC-E + 5digit
NW-7
(4)
CODE39 (STANDARD)
(5)
CODE39 (FULL ASCII)
(6)
ITF
(7)
(8) MSI
CODE93
(9)
(10) CODE128
(11) EAN128
(12) Data Matrix
7) Bar code rotation ................. 0
(3) Effective print width ....... 104.0 mm
(4) Thermal pitch ................ 0.125 mm
(3) Effective print width ....... 104.0 mm
Cut (Option)
Peel-off (Option)
° , 90 ° , 180 ° , 270 °
1-4
(13) PDF417
(14) QR Code
(15) Industrial 2 of 5
(16) Customer Bar Code
(17) POSTNET
(18) RM4SCC
(Royal Mail 4 State Customer Code)
(19) KIX CODE
(20) Maxi Code
(21) Micro PDF417
(22) CP CODE
(23) GS1 Databer
(The composite is included.)
SPTM-0152
1.4 BASIC SPECIFICATIONS