Toshiba B-EX4 T1 Series Product Description page 29

2. SUPPLY SPECIFICATIONS
2.2.3 NOTES on using ribbon
If the difference between the ribbon width and the paper width is too large, the ribbon may wrinkle. Refer
to the table below and choose the paper appropriate to the ribbon width. Even if the ribbon is narrower
than paper, printing can be performed. However, it results in the narrower print range.
B-EX4T Type2 series
Ribbon width
Appropriate
paper width
When use paper width over 108mm, we recommend ribbon width using 112mm or over.
The ribbon tension adjustment may be further required according to the ribbon width. In the case a
narrower width of the ribbon is used, if the ribbon tension is strong, the ribbon will wrinkle. According to the
print patterns, fine adjustment of the ribbon take-up motor voltage is required. As a guide, regardless of
the print speed, it should be set to "-3" (FW) and "-1" (BK) for 68-mm wide ribbon, and "-4" (FW) and "-2"
(BK) for 50-mm wide or less ribbon, respectively.
2.2.4 Approved Ribbon
The manufacturer ink names must be handled carefully and must not be revealed.
problem.
Item Code Item Code
(Grobal) (Japanese)
BR-*****AW3 BR-*****W10N
BR-*****AW5
BR-*****AW6F
BR-*****AW7F BR-*****W05
BR-*****AG3
BR-*****AG4 BR-*****A11N
BR-*****AS1 BR-*****A21
BR-*****AS2
BR-*****AS3
BR-*****RG2 BR-*****R1
BR-*****R1S
BR-*****RS1 BR-*****R2
BR-*****R2S
BR-*****SW1
BR-*****SG3F
BR-*****SG4F
BR-*****SS2F
41mm 50mm
30 to 36 ｍｍ 36 to 45 mm
Manufacturer
Ink Name
AWR6
AWX-FH
AWARD
AWR470Solfree
APR6
APX-FH
AXR7+
AXR8
AXR9
B110A
B110AXS
B110C
B110CR
TR4085
TR5080
N280
R510HF
68mm
45 to 63 mm
Type: N: Normal
Ink Base
Thickness Thickness
(µm) (µm)
2-13
84ｍｍ 112ｍｍ
63 to 79 mm 79 to 114 ｍｍ
P: Premium S: Super premium
Manufacturer Type
ARMOR N
ARMOR N
ARMOR N
ARMOR N
ARMOR P
ARMOR P
ARMOR S
ARMOR S
ARMOR S
RICOH P
RICOH P
RICOH S
RICOH S
DNP N
DNP P
DNP P
DNP S
SPTM-0152
2.2 RIBBON
Remarks
Japanese only
Japanese only