Outline; Printer Specifications; Description Of Model Number - Toshiba B-EX4 T1 Series Product Description

1. OUTLINE

1. OUTLINE

1.1 PRINTER SPECIFICATIONS

1) Various bar codes, characters and graphic data can be printed using both thermal transfer and
thermal direct methods. This printer can also print writable characters and logos at designated
coordinates by using a graphic command.
2) The USB and LAN interface are available as standard interfaces between the printer and a PC. In
addition, optional interfaces such as RS-232C interface, Centronics interface, expansion I/O
interface, RTC & USB Host interface and Wireless LAN interface are available.
3) A 32-bit CPU and ASIC equipped with several peripheral LSIs realizes high system performance.
4) With the element positioned at the edge of the print head, print quality is improved because the
media passes straight through.
5) The B-EX4 series accommodates a max. printing speed of 14"/sec.
6) High throughput can be obtained with "on-the-fly" formatting.
7) Installation space is minimized because the media is loaded internally.
8) The metal cover and damper provide a heavy-duty enclosure.
9) Various optional devices, including the Strip module including the rewinder, the ribbon saving
module which economizes ribbon usage, rotary cutter module, disk cutter module, RFID module,
RS-232C interface, Centronics interface, expansion I/O interface, RTC & USB Host interface and
Wireless LAN interface are available.
NOTE: Every size is written in millimeter (mm) in this manual. To obtain the size in inch, divide by 25.4.

1.2 DESCRIPTION OF MODEL NUMBER

B - E X 4 T 2 - G S 1 2 - QM - R
Issue mode
Resolution
G: 203dpi
T: 305dpi or 300dpi
H: 600dpi
Print head type / Sensor Position
1: Near Edge head / Center
2: Flat head / left side
Printing method
D: Thermal direct
T: Thermal transfer and thermal direct
Printing width
4: 4 inches width
6: 6 inches width
Compliance with ROHS
R: RoHS compliant model
Destination Code
QM: Global
CN: China
None: Japan
Machine Type
2: Oversea Standard Model
5: Japan Model
6: WLAN with CN Model
8: RFID with CN model
Machine Version
1: Version 1
S: Standard type
H: Peel-off type
C: Cutter type
1-1
SPTM-0152
1.1 PRINTER SPECIFICATIONS