Toshiba B-EX4 T1 Series Product Description page 25

2. SUPPLY SPECIFICATIONS
(3) Perforation
Labels and tags must always be perforated from the printing side.
Note) At present time, Fanfold paper has not been certified.
If using Fanfold paper, paper retainer should be required.
(4) Preprinting
The print head may be abnormally worn depending on the ink to be used. Ink which do not contain
materials of high hardness, such as, calcium carbonate and kaolin, should be used for preprinting.
(5) Printing Black Marks on the Label
The black marks should be printed on the back of the gaps.
The black marks should be positioned so that they come in contact with or partly overlap the
previous label. (See the figure below.)
(Example) Gap length:
10 mm
10 mm
Black mark: 4 mm
Min. 12 mm
4 mm
(Print side)
(Center of paper)
Black mark (Perspective of the back side)
Feed direction
Label
Black mark should come in contact with or
partly overlap the previous label.
2-9
SPTM-0152
2.1 MEDIA (Paper)