Toshiba B-EX4 T1 Series Product Description page 50

3. OPTIONAL KIT
3.2 PEEL OFF MODULE: B-EX904-H-QM-R
This strip module consists of the take-up block and the strip block. Installing the strip module enables
the printer to not only remove labels from the backing paper, but wind the tag paper or label with
backing paper onto the take-up spool by using the rewinder guide plate. The rewind full sensor is
provided to detect the overflow if the wound tag paper or label exceeds the specified amount is
provided.
Specification:
Contents
Peel-off method
Function Select SW
Peel-off Sensor
Over flow Sensor
Operation temparature
Print speed 203dpi
300dpi
305dpi
Specification
Rewind paper with DC motor.
Can selectable 2mode of rewind
function.
・ Standard Peel-off mode
・ Rewind mode
Note:Using this function should be
indication by print command.
The sensor, which detects the Peel-off
label.
The sensor, which detects the over
flow of rewind liner.
5 to 40 °C
Humidity 10 to 90%（Does not dew）
EXPIO 3-10ips
Type1(STD)
EXPIO Selected print speed
Type2(In-line) Automatic pre-peel-off
mode for over 10ips.
EXPIO 3-8ips
Type1(STD)
EXPIO Selected print speed
Type2(In-line) Automatic pre-peel-off
mode for over 10ips.
3-3
3.2 PEEL OFF MODULE: B-EX904-H-QM-R
Print speed set to
10ips over,
operate 10ips
automatically
Do not support
internal rewinder
Print speed set to
8ips over,
operate 8ips
automatically
Do not support
internal rewinder
SPTM-0152