Usb Device Setting - Advantech PCI-7030 User Manual

3.2.6

USB Device Setting

USB 1.0 Controller
!
Select.Enabled. if your system contains a Universal Serial Bus (USB) controller
and you have USB peripherals. The choices are "Enabled" and "Disabled".
! USB 2.0 Controller
This entry is used to disable/enable the USB 2.0 controller only. The BIOS itself
may or may not have high-speed USB support. If the BIOS has high speed USB
support built in, the support will automatically turn on when a high speed device
is attached. The choices are "Enabled" or "Disabled".
USB Operation Mode
!
Set the USB 2.0 controller to Hi Speed (480 Mbps) or Full Speed (12 Mbps).
! USB Keyboard / Mouse Function
Select "Enabled" if you plan to use a USB keyboard/Mouse. The choices are
"Enabled" and "Disabled".
! USB Storage Function
Select "Enabled" if you plan to use an external USB storage device to boot sys-
tem under DOS mode. The choices are "Enabled" and "Disabled".
37 PCI-7030 User Manual