Graphics; Ethernet Lan; Industrial Features; Mechanical And Environmental Specifications - Advantech PCI-7030 User Manual

! USB port: Supports up to 6 USB 2.0 for PCI-7030VG (2 on real I/O); 5 USB 2.0
for PCI-7030G2 (1 on real IO) with 480 Mbps; 4 ports onboard.
! GPIO connector: 16-bit general purpose Input/Output
1.3.4

Graphics

! Controller: Chipset integrated VGA controller
! Display memory: Dynamically shared system memory up to 224 MB
! CRT: Up to 2048 x 1536 resolution, 400 MHz RAMDAC
! LVDS: Supports single channel 18-bit/ dual channel 36-bit LVDS, Up to UXGA
1600 x 1200
! DVI: Supports maximum pixel lock of 400 MHz, up to 2048 x 1536 resolutions
@ 75 Hz refresh rate
1.3.5

Ethernet LAN

! Supporting dual 10/100/1000 Mbps Ethernet port (s) via PCI Express x1 bus
which provides 500 MB/s data transmission rate
! Controller: Intel 82574L Chipset
1.3.6

Industrial features

! Watchdog timer: Can generate a system reset. The watchdog timer is pro-
grammable and can be set from 1 to 255 seconds or 1 to 255 minutes.
1.3.7

Mechanical and environmental specifications

! Operating temperature: 0 ~ 60° C (32 ~ 140° F) (operating humidity: 40°C @
85% RH Non-Condensing)
! Storage temperature: -20 ~ 70° C (-4 ~ 158° F)
! Humidity: 5 ~ 95% non-condensing
! Power supply voltage: +5 V, +12 V, 5 Vsb
! Power consumption:
+12 V @ 0.31 A ,+5 V @ 2.19 A , +3.3 V @ 0 A ,+5 VSB @ 0.04 A , +2 V @ 0 A
(Measures the maximum current value which system under maximum load
(ATOM 1.6G + DDR2 533 / 2G))
! Board size: 185 mm (L) x 122 mm (W) (7.3" x 4.8")
! Board weight: 0.365 kg
1.4

Jumpers and Connectors

Connectors on the PCI-7030 CPU card link it to external devices such as hard disk
drives and a keyboard. In addition, the board has a number of jumpers used to con-
figure your system for your application.
The tables below list the function of each of the board jumpers and connectors. Later
sections in this chapter give instructions on setting jumpers. Chapter 2 gives instruc-
tions for connecting external devices to your CPU card.

Table 1.1: Jumpers

Label
CMOS1
JLVDS1
JWDT1
Function
CMOS clear
LVDS voltage selection
Watchdog timer output selection
3 PCI-7030 User Manual