1.8.2
CMOS Clear (CMOS 1)
To avoid damaging the computer, always turn off the power supply before setting
"Clear CMOS". Before turning on the power supply, set the jumper back to "3.0 V
Battery On". This jumper is used to erase CMOS data and reset system BIOS Infor-
mation.
The procedure for clearing CMOS is:
1.
Turn off the system.
2.
Short pin 2 and pin 3.
3.
Turn on the system. The BIOS is now reset to its default setting.
Table 1.3: CMOS1
Function
*Keep CMOS data
Clear CMOS data
* Default
1.8.3
JLVD1: LCD Power 3.3 V/5 V Selector
Table 1.4: JLV1/JLV2: LCD Power 3.3 V/5 V Selector
Closed Pins
1-2*
2-3
*Default
Jumper Setting
1
1-2 closed
1
2-3 closed
Result
3.3 V*
5 V
1
3.3 V
1-2 closed
9
1
5 V
2-3 closed
PCI-7030 User Manual