Table of Contents
Advertisement
1.3.4
Graphics
Controller: Integrated Intel® HD Graphics
Display memory: Shared memory is subject to OS (maximum 1 GB shared
memory with 2 GB or above memory installed)
DisplayPort: Resolution up to 4096 x 2304 @ 60 Hz refresh rate
DVI-D: Resolution up to 1920 x 1200 @ 60 Hz refresh rate
VGA: Resolution up to 1920 x 1200 @ 60 Hz refresh rate
1.3.5
Ethernet LAN
Supports dual 10/100/1000Base-T Ethernet ports via PCIe x1 bus which pro-
vides a 500 MB/s data transmission rate
Interface: 10/100/1000Base-T
Controller: Intel® I219-LM(PHY) for LAN1, Intel® I210-AT(NIC) for LAN2 (sup-
porting iBMC)
1.3.6
Industrial Features
Watchdog timer: Can generate system reset or NC. The watchdog timer is pro-
grammable, with each unit equal to one second (255 levels)
1.3.7
Mechanical and Environmental Specifications
Operating temperature: 0 ~ 60 °C (32 ~ 140 °F, depending on CPU speed and
system thermal solution)
Storage temperature: -40 ~ 85 °C (-40 ~ 185 °F)
Humidity: 5 ~ 95% non-condensing
Power supply voltage: +3.3 V, +5 V, ±12 V, +5 VSB
Power consumption: Intel® Core™ i5-10500E; DDR4 32 GB x 4
Maximum: +3.3 V at 0.87 A, +5 V at 1.92 A, +12 V at 7.58 A, +5 Vsb at 0.14 A,
-12 V at 0.08 A
Board size: 304.8 x 244 mm (12 x 9.6 in)
Weight of board: 0.7 kg (1.54 lb)
1.4
Jumpers and Connectors
Connectors on the AIMB-787 motherboard link it to external devices such as hard
disk drives and a keyboard. In addition, the board has a number of jumpers that are
used to configure your system for your application.
The tables below lists the function of each of the jumpers and connectors. Later sec-
tions in this chapter give instructions on setting jumpers. Chapter 2 gives instructions
for connecting external devices to your motherboard.
Table 1.1: Jumpers
Label
JCMOS1
JME1
JWDT1
JOBS1
PSON1
AIMB-787 User Manual
Function
CMOS clearness
Intel® ME update
Watchdog timer reset
Hardware monitor alarm
AT/ATX mode selection
4
Advertisement
Table of Contents
