Kguard BR401 User Manual page 93

Show Message Check the box to display a message on screen when the alarm is triggered.
Send Email Check to enable email alarm notification. If the function is enabled, the system will
send the alarm images to the specified email address. See
page
Full Screen Check the box to enable this function. If this function is enabled and the alarm is
triggered, the corresponding channel will be displayed in full screen. Select the screen
display duration (1 S/3 S/5 S/7 S/10 S)
Alarm Out If an alarm device is connected, check the box to make the device sound the alarm
when triggered.
Enable Record Check the box to enable the post recording option.
Post Recording Select the post-recording duration.
Record Channel Check the box to enable recording and then select the channels to record when the
alarm is triggered.
4
After all settings are complete, click Save.
« TIP »
• To apply the same recording settings to other channels, click Copy. See
on page 79.
• To cancel any modifications and retain the existing settings, click Refresh.
53.
Chapter 5: KGUARD Web Client
"4.4.4 Email Settings" on
"Copying Settings To Other Channels"
DVR User's Manual
93