Setting The Email - Kguard BR401 User Manual

Chapter 5: KGUARD Web Client

Setting the Email

Use the Email menu to configure the sending and receiving email servers to use to send and receive email alarm
notifications.
1
On the Main Menu, click Remote Setting.
2
On the left panel, click Network > Email.
3
Modify the necessary settings.
Menu item
Email
SSL
SMTP Port
SMTP Server
Sender Email
Sender Pwd
Receiver Email
Interval
4
After all settings are complete, click Save.
5
To test the configuration, click Email Test.
« TIP »
To cancel any modifications and retain the existing settings, click Refresh.
DVR User's Manual
88
Description
Enable/Disable email configuration.
SSL (Secure Sockets Layer) protocol is used to secure your email account. Enable SSL if
the email server needs the SSL verification. Check with your email service provider for
the applicable setting.
Enter the SMTP port of the email server that you want to use to send emails.
Note:
By default, the SMTP port is 25 for email without SSL verification. For Gmail server
or for email that needs SSL verification, the SMTP port is 465, by default. Check with
your email service provider for the correct setting.
Enter the SMTP server of the email server that you want to use to send emails.
Enter the email address from where you want to send the email.
Enter the sender's email password.
Enter the email address where you want to send the email alarm notification.
Select the interval time between sending of emails (1/3/5/10 Minute).