3.7 Manual Recording
With this function, you can manually record the video. The system will continuously record the video until you
manually stop the recording.
To enable manual recording:
1
In the preview mode, right-click on the mouse to display the Pop-up menu.
2
Select Start Record.
The video recording starts.
To stop the manual recording:
1
Right-click on the mouse to display the Pop-up menu.
2
Select Stop Record.
The video recording stops.
Note:
This function is available only if record mode is set to schedule. See
3.8 Adjusting Volume
You can adjust or mute the output volume while viewing the channels on a monitor.
To adjust the volume:
1
In the preview mode, right-click on the mouse to display the Pop-up menu.
2
Select Volume.
3
Drag the slider to adjust the volume. Or, select MUTE to mute the audio.
4
Select the Save button to save the volume setting.
Chapter 3: Getting Started
"4.2 Record Setup" on page
42.
DVR User's Manual
37