Using Ptz Controls - Kguard BR401 User Manual

5.3.3 Using PTZ Controls

If you are using a PTZ speed dome camera, use the PTZ Controls to adjust the viewing scope other PTZ settings.
No. Item
Pointer pan
1
2 Speed
3 Zoom
4 Focus
5 Iris
Cruise
6
7 Hue
8 Brightness
Preset
9
10 Saturation
11 Contrast
12 Default
1
2
3
4
5
6
7
8
Description
Click the direction arrows to select the direction of the PTZ camera.
Click the middle icon to switch to auto pan.
Drag the slider to adjust speed.
Click the icons to adjust the zoom setting.
Click the icons to adjust the focus setting.
Click the icons to adjust the iris setting.
Click to start cruise. Click
Click on the bars to adjust the hue setting.
Click on the bars to adjust the brightness setting.
Set the preset point, then click
Click on the bars to adjust the saturation setting.
Click on the bars to adjust the contrast setting.
Click Default or to restore the default PTZ camera settings.
Chapter 5: KGUARD Web Client
9
10
11
12
to stop cruise.
to go to the preset point.
DVR User's Manual
75